Monitoring some phenoxyl-type N-methylcarbamate pesticide residues in fruit juices using high-performance liquid chromatography with peroxyoxalate-chemiluminescence detection

A systematic investigation of optimal conditions for determining three of the most common phenoxyl-type N-methylcarbamate pesticides (carbaryl, carbofuran and propoxur) in fruit juices by HPLC with peroxyoxalate-chemiluminescence detection is described. The required pre-column hydrolysis of pesticides and derivatization of their hydrolytic metabolites with dansyl chloride was simultaneously carried out in a short time thanks to the micellar catalytic effect provided by cetyltrimethyl ammonium bromide micelles on the hydrolysis step. The liquid chromatographic separation of the dansylated phenols was performed on a reversed-phase C18 column with isocratic elution. The analytes were detected by using an integrated derivatization chemiluminescence detection unit based on the bis(2,4,6-trichlorophenyl)oxalate-hydrogen peroxide system. Fruit juice samples containing 4.0-1500 microg/l pesticides were analysed with a precision of ca. 6.5%. After contamination of the fruit juice samples, average recovery > 93% at fortification levels of 10-100 microg/l was obtained.     

A Comparative Study of Naproxen – Beta Cyclodextrin Complexes Prepared by Conventional Methods and Using Supercritical Carbon Dioxide

Naproxen is a poorly soluble anti-inflammatorydrug, the solubility of which canbe enhanced by complexation withbeta-cyclodextrin. Besides that, the inclusioncomplex reduces the incidence of gastrointestinal side effects of the drug. The aim of this work was to compare the physicochemical characteristics of the solid complexes prepared by traditional methods (kneading, freeze-drying and spray-drying) and using a supercritical fluid technology. The unusual solvent properties of carbon dioxide above their critical temperature and pressure were exploited in order to prepare inclusion compounds. Complexes prepared using supercritical fluid technology showed similar properties to those of freeze-drying andspray-drying complexes as proved by DSC, FT-IRand UV.     

Ag(I) complexes with alkylidene-bis(2-aminopyrimidines) as building units for discrete metallomacrocyclic frames. A structural and solution study

Alkylidene-bis(2-aminopyrimidines) (pyr2Cx, x = 2-5) are useful ligands to interact with Ag(I) yielding discrete metallocycles. Crystal structures of the [(pyr2C2)Ag(NO3)]2 and [(H-pyr2C4)Ag(NO3)2]2 have been isolated where each macrocyclic moiety interacts with their surroundings through weak interactions, yielding 3D discrete structures, On the other hand, the solution study shows that the equilibrium constants for the formation of Ag(pyr2Cx)+ complexes are higher than the literature values for Ag(I) complexes with single pyrimidines, although the differences could be explained by invoking the solid-state structures of the Ag(I)-pyr2Cx complexes.     

Determination of mercury in soils and sediments by graphite furnace atomic absorption spectrometry with slurry sampling

A graphite furnace atomic absorption spectrometric procedure for the determination of mercury is presented, in which the samples are suspended in a solution containing hydrofluoric and nitric acids. Silver nitrate (4% m/v) and potassium permanganate (3%) are incorporated, in the order specified, and aliquots are directly introduced into the graphite furnace. A fast heating programme with no conventional pyrolysis step is used. The detection limit for mercury in a 125 mg ml⁻¹ suspension is 0.1 μg g⁻¹. Calibration is performed by using aqueous standards. The reliability of the procedure is proved by analysing certified reference materials.     

A multisyringe flow-through sequential extraction system for on-line monitoring of orthophosphate in soils and sediments

A fully automated flow-through microcolumn fractionation system with on-line post-extraction derivatization is proposed for monitoring of orthophosphate in solid samples of environmental relevance. The system integrates dynamic sequential extraction using 1.0 mol l⁻¹ NH₄Cl, 0.1 mol l⁻¹ NaOH and 0.5 mol l⁻¹ HCl as extractants according to the Hieltjes-Lijklema (HL) scheme for fractionation of phosphorus associated with different geological phases, and on-line processing of the extracts via the Molybdenum Blue (MB) reaction by exploiting multisyringe flow injection as the interface between the solid containing microcolumn and the flow-through detector. The proposed flow assembly, capitalizing on the features of the multicommutation concept, implies several advantages as compared to fractionation analysis in the batch mode in terms of saving of extractants and MB reagents, shortening of the operational times from days to hours, highly temporal resolution of the leaching process and the capability for immediate decision for stopping or proceeding with the ongoing extraction. Very importantly, accurate determination of the various orthophosphate pools is ensured by minimization of the hydrolysis of extracted organic phosphorus and condensed inorganic phosphates within the time frame of the assay. The potential of the novel system for accommodation of the harmonized protocol from the Standards, Measurement and Testing (SMT) Program of the Commission of the European Communities for inorganic phosphorus fractionation was also addressed. Under the optimized conditions, the lowest detectable concentration at the 3σ level was ≤0.02 mg P l⁻¹ for both the HL and SMT schemes regardless of the extracting media. The repeatability of the MB assay was better than 2.5% and the dynamic linear range extended up to 7.0 mg P l⁻¹ in NH₄Cl and NaOH media and 15 mg P l⁻¹ whenever HCl is utilized as extractant for both the HL and SMT protocols.     

Determination of dinoseb by adsorptive stripping voltammetry using a mercury film electrode

An adsorptive stripping voltammetric method for the determination of the pesticide dinoseb (2-sec.-butyl-4,6-dinitrophenol) at the mercury film electrode is described. The deposition of the mercury film on a glassy carbon disk electrode was optimized. The temperature, at which the mercury film was deposited, was demonstrated to have a strong influence on the stripping peaks, the first one being much more intense than the second. A systematic study of the variables affecting the stripping response was carried out by differential pulse voltammetry. The results obtained have been compared with those at the HMDE; a significant improvement in the sensitivity of the method developed with the MFE was observed. Using a 300 s accumulation time, the limits of determination and detection were 3.6 × 10^–10 and 1.1 × 10^–10 mol L^–1, respectively. The effect of the presence of several herbicides on the dinoseb response was also tested. The method has been applied to the determination of the pesticide in spiked apple juice at two concentration levels: 12.0 and 1.2 g L^–1 of juice.     

Liquid chromatography with ultraviolet absorbance detection for the analysis of tetracycline residues in honey

The separation of tetracyclines (TCs) using reversed-phase liquid chromatography (LC) is proposed. The use of an amide-based stationary phase prevents the interaction of tetracyclines with the residual silanol groups and thus avoids the appearance of tailed peaks. Detection was based on using an UV spectrophotometer and gradient elution with acetonitrile-oxalic acid as mobile phase permitted good separation of all the peaks. Specificity was demonstrated by the retention characteristics, UV spectra and peak purity index. Linearity, precision, recovery and sensitivity were satisfactory. The procedure was applied to the analysis of tetracycline residues (tetracycline, oxytetracycline (OTC), chlortetracycline (CTC), doxycycline (DC), minocycline (MINO) and methacycline (MTC)) in honey of different types. Extraction involved using a mild acidic solvent containing EDTA to release protein-bound or sugar-bound tetracyclines. For the clean-up step, solid phase extraction using phenyl cartridges was applied. Detection limits in the honey using the proposed procedure are between 15 and 30 ng g(-1), depending on the tetracycline.     

Singlet exciplexes between a thioxanthone derivative and substituted aromatic quenchers: role of the resonance integral

Fluorescence quenching of a thioxanthone derivative by methyl- and methoxy-substituted benzenes (MeB and MeOB, respectively) is performed in solvents of different polarity. Emissive exciplexes are observed even in polar solvents and provide kinetic and spectroscopic data over a large scale of solvent polarity. These data were subsequently analyzed by use of a new theoretical model that leads to a thermodynamic relationship between exciplex and electron-transfer driving forces Delta G(exc) and Delta G(et), respectively. The remarkable agreement found between this model and both kinetic and spectroscopic data supports its validity. Moreover, the difference observed between MeB and MeOB compounds in quenching efficiency is analyzed by this model and provides the main parameters governing exciplex features, especially the resonance integral between locally excited and charge-transfer states.     

Single-ion magnetism in the extended solid-state: insights from X-ray absorption and emission spectroscopy

Large single-ion magnetic anisotropy is observed in lithium nitride doped with iron. The iron sites are two-coordinate, putting iron doped lithium nitride amongst a growing number of two coordinate transition metal single-ion magnets (SIMs). Uniquely, the relaxation times to magnetisation reversal are over two orders of magnitude longer in iron doped lithium nitride than other 3d-metal SIMs, and comparable with high-performance lanthanide-based SIMs. To understand the origin of these enhanced magnetic properties a detailed characterisation of electronic structure is presented. Access to dopant electronic structure calls for atomic specific techniques, hence a combination of detailed single-crystal X-ray absorption and emission spectroscopies are applied. Together K-edge, L_2,3-edge and Kβ X-ray spectroscopies probe local geometry and electronic structure, identifying iron doped lithium nitride to be a prototype, solid-state SIM, clean of stoichiometric vacancies where Fe lattice sites are geometrically equivalent. Extended X-ray absorption fine structure and angular dependent single-crystal X-ray absorption near edge spectroscopy measurements determine Fe^I dopant ions to be linearly coordinated, occupying a D_6h symmetry pocket. The dopant engages in strong 3dπ-bonding, resulting in an exceptionally short Fe–N bond length (1.873(7) Å) and rigorous linearity. It is proposed that this structure protects dopant sites from Renner–Teller vibronic coupling and pseudo Jahn–Teller distortions, enhancing magnetic properties with respect to molecular-based linear complexes. The Fe ligand field is quantified by L_2,3-edge XAS from which the energy reduction of 3d_z² due to strong 4s mixing is deduced. Quantification of magnetic anisotropy barriers in low concentration dopant sites is inhibited by many established methods, including far-infrared and neutron scattering. We deduce variable temperature L₃-edge XAS can be applied to quantify the J = 7/2 magnetic anisotropy barrier, 34.80 meV (∼280 cm⁻¹), that corresponds with Orbach relaxation via the first excited, M_J = ±5/2 doublet. The results demonstrate that dopant sites within solid-state host lattices could offer a viable alternative to rare-earth bulk magnets and high-performance SIMs, where the host matrix can be tailored to impose high symmetry and control lattice induced relaxation effects.

Taking advantage of synchrotron light source methods, we present the geometric and electronic structure of iron doped in lithium nitride.     

Profit maximization in an inventory system with time-varying demand,partial backordering and discrete inventory cycle

In this paper, an inventory problem where the inventory cycle must be an integer multiple of a known basic period is considered. Furthermore, the demand rate in each basic period is a power time-dependent function. Shortages are allowed but, taking necessities or interests of the customers into account, only a fixed proportion of the demand during the stock-out period is satisfied with the arrival of the next replenishment. The costs related to the management of the inventory system are the ordering cost, the purchasing cost, the holding cost, the backordering cost and the lost sale cost. The problem is to determine the best inventory policy that maximizes the profit per unit time, which is the difference between the income obtained from the sales of the product and the sum of the previous costs. The modeling of the inventory problem leads to an integer nonlinear mathematical programming problem. To solve this problem, a new and efficient algorithm to calculate the optimal inventory cycle and the economic order quantity is proposed. Numerical examples are presented to illustrate how the algorithm works to determine the best inventory policies. A sensitivity analysis of the optimal policy with respect to some parameters of the inventory system is developed. Finally, conclusions and suggestions for future research lines are given.